How to Make an STL File From an Image – Convert JPG to STL Here is the final product printed on an Ender 3 – 2 hours and 31 minutes, 19 grams of white PLA filament. This is why it’s best to 3D print statues and busts where the details are created in line with height rather than horizontally. When it comes to 3D printing and orientations, you get more accuracy in the Z-direction as opposed to the XY direction. I’d recommend standing the model up vertically, as well as placing a raft to secure it in place as shown in the Preview mode in the picture below. You’ll now see the 3D model of the image placed on the Cura build plate. The defaults should work just fine but you can test these out and preview the model.
I’ll show you the very basic method to turn a picture into a 3D print, though there are more detailed methods that achieve better results which I’ll describe further in the article.įirstly, you want to find an image which I found in Google Images.įind the image file in the folder you placed it in then drag the file straight into Cura. It’s advisable to print these vertically standing to capture the detail, and with a raft underneath to hold it in place. It is possible to turn a picture into a 3D print just by inserting the JPG or PNG file into your slicer like Cura and it will create a 3D printable file that you can adjust, modify, and print. How to Make a 3D Lithophane Model From a Photo.How to Make a 3D Model From a Photo – Photogrammetry.How to Make an STL File From an Image – Convert JPG to STL.Can You Turn a Picture Into a 3D Print?.
0 kommentar(er)
